- Wellhead and small unmanned platforms — the thousands of compact steel structures dotting the North Sea that serve individual or small clusters of wells — represent the fastest-growing and often least well-funded segment of the offshore decommissioning market, with the UK NSTA estimating hundreds of these structures requiring removal within the next decade.
- Unlike major production platforms where large crane vessels and dedicated decommissioning campaigns are justified, small platform removal typically uses existing construction support vessels and jack-up rigs in multi-rig, multi-platform campaigns that bundle multiple small removals to achieve logistics efficiency and spread mobilisation costs.
- Operator liability for decommissioning small wellhead platforms is often fragmented across multiple parties — original licence holders, current operators, and historic working interest participants — creating legal and financial complexity that can delay decommissioning even when the technical work is straightforward.
The Scale of the Small Platform Challenge
The North Sea decommissioning narrative tends to focus on the large, iconic structures — the Brent Spars, the Ninian Centrals, the Frigg DP2s — whose removal requires specialist vessels and makes international news. But the reality of the decommissioning workload is that most of it is small: wellhead platforms, satellite platforms, bridge-linked structures, and simple steel jackets with minimal process facilities whose primary role was to support individual oil or gas wells tied back to larger host facilities.
On the UK Continental Shelf, there are approximately 200-300 structures in the wellhead and small unmanned platform category that are at or beyond the end of their economic productive life, with hundreds more approaching that point within the next decade. These structures range from simple wellhead protector structures (essentially a small steel frame over a subsea wellhead with minimal topsides equipment) to small unmanned installations (SUIs) with a few wellheads, minimal processing, and access by helicopter or boat for periodic inspection.
The Norwegian side of the North Sea has a comparable number of smaller structures requiring decommissioning, though the Norwegian regulatory framework — generally well-funded by the Norwegian state through Petoro’s shares and the Norwegian Oil Fund’s long-term financial resources — is somewhat better positioned to manage the cost and timeline than the more fragmented UK market.
Well P&A on Small Platforms: The Dominant Cost Driver
As with major platform decommissioning, well Plugging and Abandonment (P&A) is typically the largest cost element for small platform decommissioning programmes. A wellhead platform with 4-6 wells requires 4-6 individual P&A operations, each requiring a jack-up drilling rig or semi-submersible to access the wellbore and install the required permanent barriers. For small platforms in shallow water (up to 100 metres), a jack-up rig is the standard tool — the rig elevates its hull above the wave zone, positions over the platform, and accesses the wellheads through the rig’s moonpool or from the cantilever.
The economies of scale in well P&A are significant. Mobilising a jack-up rig for a single P&A operation on an isolated wellhead platform is expensive relative to the scope — day rates plus mobilisation costs for a single well might total $5-10 million. Bundling multiple P&A campaigns — using the same rig to work sequentially through 10-15 small platforms in a geographic cluster — reduces the per-well cost significantly by spreading mobilisation costs and maintaining the rig crew in the area without transit between distant platforms.
This “campaign” approach to small platform decommissioning has been adopted by several North Sea operators and is actively promoted by the NSTA as the preferred model for efficient small platform P&A. CNOOC’s North Sea portfolio, Harbour Energy’s acquired assets, and the portfolios of smaller independents have all seen bundled P&A campaign approaches that have reduced per-well costs relative to individual mobilisations.
Structural Removal: The Compact Operations Approach
After the wells are P&A’d, the structural removal of a small wellhead platform or satellite installation is physically much simpler than a major production platform removal, but still requires crane vessel deployment and careful operational planning. For a typical small unmanned installation — a jacket structure 30-50 metres high with a simple topside deck weighing 50-200 tonnes — the removal can be accomplished by a medium heavy-lift vessel with crane capacity of 1,000-2,000 tonnes, operating in a single lift operation that takes hours rather than days.
The campaign economics that apply to P&A also apply to structural removal. A construction support vessel or platform support vessel with crane that mobilises to a North Sea area for a dedicated small platform removal campaign can target 3-5 structures per week in favourable weather, spreading the vessel day rate across multiple removals. The UKCS shallow-water areas — the Southern Gas Basin, the Morecambe Bay area, and the Inner Moray Firth — are particularly suitable for this campaign approach due to the geographic clustering of small structures.
The Liability Fragmentation Problem
One of the most challenging aspects of small platform decommissioning is the fragmentation of legal and financial responsibility. Many North Sea wellhead platforms were installed in the 1970s and 1980s under operating agreements that have changed hands multiple times through asset sales, mergers, and bankruptcies. The current registered operator may hold only a minority working interest; other interest holders may include companies that have since been acquired, renamed, or dissolved; and the Petroleum Act decommissioning liability that attaches to all past licence holders creates a complex chain of potentially responsible parties.
The NSTA has powers under the Energy Act to serve section 29 notices on previous licence holders requiring them to contribute to decommissioning costs — a backstop mechanism that prevents operators from abandoning their responsibilities through corporate restructuring. But exercising these powers requires legal process, takes time, and creates adversarial relationships that complicate the practical decommissioning work. The NSTA’s preferred approach is voluntary industry compliance with decommissioning security agreements (DSAs) that establish financial provisions for future liabilities in advance — but smaller operators and historic interest holders are often resistant to DSA requirements that impose upfront cash provisions on balance sheets that are already under pressure.
Material Recycling: The Commercial Upside
Offshore steel structures removed from the North Sea end up primarily at specialist decommissioning yards — the most significant in the UK being at Dales Voe in Shetland, Able UK’s facility in Hartlepool, and the Lerwick Port Authority facilities. The steel and other metals recovered from decommissioned structures have commercial value as scrap — the steel market price varies, but offshore structural steel typically achieves £200-300 per tonne at current scrap market prices.
For a small wellhead platform with 200 tonnes of steel in the topside and 500 tonnes in the jacket substructure, the scrap value is perhaps £100,000-200,000 — not trivial but not transformative relative to the total decommissioning cost. The material value offsets a small fraction of the overall decommissioning bill, but the primary economic driver of decommissioning decisions is cost minimisation rather than material recovery value. The industry’s focus on circular economy principles — recovering and reusing materials from decommissioned assets, including recovering equipment for refurbishment and redeployment rather than scrapping it — is growing but still represents a minority of the total decommissioning waste stream.

