Offshore oil and gas platform glowing under golden hour light over the seaOffshore platform glowing at golden hour

Poland’s offshore wind sector is one of the most consequential energy stories in Central Europe. A country that has historically relied on coal for approximately 70-80% of its electricity generation — operating one of the most carbon-intensive power grids in the EU — is making a strategic bet on Baltic offshore wind as the cornerstone of its energy transition. The Baltic Sea offshore wind resource in Polish waters is substantial: water depths of 20-50 metres across much of the Polish Economic Zone, consistent and predictable winds averaging 8-10 m/s at turbine hub height, and proximity to Poland’s major electricity demand centres in Gdańsk, Warsaw, and the industrial heartland of Silesia. If Poland can execute its offshore wind ambitions, it will not only transform its own electricity system but will become an important contributor to Baltic regional energy security and integration.

Polish Offshore Wind Regulatory Framework

Poland’s offshore wind regulatory framework was established by the Offshore Wind Energy Act, enacted in July 2021. The Act created a phased development model: an initial phase of projects allocated directly (without competitive tender) to “first mover” companies that had invested in seabed survey and development work prior to the Act — creating a pipeline of approximately 5.9 GW of projects with pre-allocated sea areas — followed by subsequent competitive auction rounds for additional capacity.

The first-phase (Phase 1) projects that received direct allocation include: Baltic Power (Orlen/Northland Power JV, 1.2 GW), Baltica 2 and Baltica 3 (PGE/Ørsted JV, 2.5 GW combined), BC-Wind (Equinor/Polenergia JV, 1.56 GW), Baltic Wind (PKN Orlen subsidiary, 880 MW), and F.E.W. Baltic II (RWE, 350 MW). The combination of Polish state-controlled energy companies (Orlen, PGE) with international offshore wind majors (Ørsted, Equinor, Northland, RWE) reflects a deliberate Polish strategy of leveraging international offshore wind expertise while ensuring domestic industrial ownership of a major strategic infrastructure sector.

Baltic Power: Poland’s First Commercial Offshore Wind Farm

Baltic Power — a 1,200 MW project being developed by Orlen (the dominant Polish energy and refining company) and Northland Power (the Canadian offshore wind developer that is providing the international expertise) — is the most advanced Polish offshore wind project and is expected to be Poland’s first commercial offshore wind farm to reach operational status. Located approximately 23 kilometres off the Polish Baltic coast near Łeba, Baltic Power will use Vestas V236-15.0 MW turbines — the same turbine as used in several North Sea projects — with 76 turbines delivering 1.14 GW of capacity.

Baltic Power received its final investment decision (FID) in 2023 and has been under construction since 2024, with installation of monopile foundations, offshore substation structures, and turbines progressing through 2025-2026. The project has secured a Contract for Difference (CfD-equivalent) support from the Polish government under the Offshore Wind Energy Act’s support scheme — a fixed-price contract mechanism that provides revenue stability for the project’s 25-year operational life. First power is targeted for 2026, with full commercial operations in 2027.

The Baltic Power supply chain represents a significant European offshore wind industrial commitment. Monopile foundations are being manufactured by Steelwind Nordenham (Germany); turbines by Vestas (Denmark); cable systems by NKT (Denmark); and installation performed by DEME’s Orion vessel and other European installation contractors. Polish industrial content — steel fabrication, port services, operations and maintenance personnel — is part of the project’s supply chain plan, though the specialised nature of offshore wind components means substantial European-sourced equipment dominates the bill of materials.

PGE/Ørsted Baltica: Poland’s Largest Offshore Wind Project

The Baltica project — operated by the PGE Ørsted partnership — is the largest planned offshore wind development in Poland and among the largest in the Baltic Sea. The combined Baltica 2 and Baltica 3 developments total approximately 2,500 MW, with Baltica 3 (1,498 MW) targeted for first power around 2027 and Baltica 2 (1,045 MW) following in subsequent years. PGE — Poland’s largest state-controlled electricity company — brings the domestic regulatory relationships, grid connection access, and balance sheet support; Ørsted brings offshore wind development, engineering, and supply chain expertise that PGE does not have domestically.

The Baltica projects will use large-diameter monopile foundations and high-capacity turbines appropriate for Baltic Sea conditions. Water depths in the Baltica area range from approximately 20-40 metres, suitable for standard monopile installation using jack-up installation vessels. The turbine selection for Baltica 3 has been announced as Siemens Gamesa SG 14-236 DD turbines — 14 MW nameplate capacity — reflecting the trend toward very large turbine units that maximises energy production per turbine and reduces the number of foundations, cable runs, and installation operations required per megawatt of capacity.

Port Development: Gdańsk and Gdynia

Developing Poland’s offshore wind sector requires significant investment in Baltic port infrastructure. The primary staging and installation ports for Polish offshore wind are Gdańsk and Gdynia — Poland’s major Baltic ports with the deep water, quay strength, and land area required for handling large offshore wind components. The Port of Gdańsk has been expanding its offshore wind-specific infrastructure — strengthened quays, laydown areas for monopiles and turbine components, and heavy lift facilities — in anticipation of component volumes from Baltic Power, Baltica, and subsequent projects.

Long-term, Poland has ambitions for Baltic port facilities to serve not only Polish offshore wind development but also projects in neighbouring Baltic states — Lithuania, Latvia, Estonia — that lack the port depth and infrastructure for large offshore wind component handling. The geographic position of Polish Baltic ports and the scale of investment being made creates a potential regional offshore wind staging hub that could serve the entire eastern Baltic offshore wind build-out.

Grid Connection and System Integration

Poland’s electricity transmission operator PSE (Polskie Sieci Elektroenergetyczne) is responsible for planning and investing in the onshore grid reinforcement required to connect Polish offshore wind to the national electricity system. Initial offshore wind export cables will land at coastal substations near Choczewo (for Baltic Power), Słupsk, and other coastal locations, with onshore transmission extensions to major load centres. PSE’s grid investment plans accommodate the first phase of Polish offshore wind capacity, but full delivery of the Phase 2 and later project pipeline will require significant further grid investment and potentially development of HVDC transmission infrastructure for more distant projects.

Poland’s energy transition from coal to renewable energy — of which Baltic offshore wind is the largest single component — has profound implications for energy security, employment in coal-dependent regions, and CO2 emissions. Poland has one of the highest electricity sector CO2 intensities in the EU, and the progressive replacement of coal generation with offshore wind will be the most significant single factor in reducing Poland’s electricity sector emissions over the next decade. The challenge of managing the transition — supporting coal community employment transitions, maintaining system security as dispatchable coal capacity is retired — is as much a social and political challenge as a technical one.