Aerial view of crude oil tank farm illuminated at nightCrude oil tank farm at night
  • LNG carriers rely on two competing containment philosophies, Moss spherical tanks and membrane systems, each solving the same cryogenic engineering problem in fundamentally different ways.
  • Membrane design has become the dominant newbuild choice, but Moss tanks retain genuine operational advantages that keep them relevant in the existing fleet.
  • Containment system choice shapes everything from vessel deck layout and cargo capacity to boil-off rates and shipyard construction economics.

The Core Engineering Problem: Containing Liquid at Minus 162°C

Natural gas is liquefied by cooling it to approximately minus 162 degrees Celsius, at which point it occupies roughly one six-hundredth of the volume it would as a gas, making sea transport economically viable in the first place. Containing a cryogenic liquid at that temperature aboard a moving vessel for a multi-week ocean voyage is a serious materials and structural engineering challenge: the containment system must accommodate the thermal contraction and expansion of metal structures as they cool from ambient temperature to cargo temperature and back, resist the fatigue loading imposed by ship motion sloshing the cargo against tank walls, and provide enough insulation that boil-off, the natural evaporation of cargo as heat leaks into the tank, stays within commercially acceptable limits.

Two fundamentally different engineering philosophies emerged to solve this problem during the early decades of LNG shipping, and both remain in active commercial service today, even though one has come to dominate new construction. Understanding why requires looking at how each system distributes structural load, handles thermal stress, and interacts with the hull that surrounds it.

Moss Spherical Tanks: Self-Supporting Simplicity

The Moss system, developed by Norwegian engineering firm Moss Maritime, uses free-standing spherical aluminium tanks that sit independently within the ship’s hull, supported by a cylindrical skirt at the tank’s equator that transfers cargo and structural loads down into the hull structure below. The spherical geometry is not an aesthetic choice; a sphere is the most structurally efficient shape for containing internal pressure and distributing thermal stress evenly across the tank surface, since there are no corners or flat panels where stress concentrations can develop.

Because the tank is entirely self-supporting and structurally independent of the hull, Moss vessels are immediately recognisable from the outside, their distinctive rows of exposed sphere tops protruding above deck level like a row of golf balls. This independence from the hull structure is the system’s key engineering advantage: the tank can contract and expand with temperature changes without imposing stress on the surrounding hull, and any leak or structural issue with one tank is straightforwardly isolated from the ship’s primary structure. Inspection and maintenance access is also generally considered more straightforward, since the tank’s full exterior surface is reachable rather than being built into the ship’s hull structure.

Membrane Systems: Building the Tank Into the Hull

Membrane containment, developed principally by the French firms Gaztransport and Technigaz, whose designs merged into what is now GTT, takes an entirely different approach. Rather than a self-supporting tank, a membrane system consists of a thin corrugated metal membrane, typically Invar, a nickel-steel alloy with an extremely low coefficient of thermal expansion, backed by layers of insulation that are bonded directly to the ship’s inner hull structure. The hull itself, not a separate tank, provides the structural strength to contain the cargo; the membrane’s job is purely to provide a leak-proof barrier and accommodate thermal movement, while the insulation limits heat ingress.

The corrugations in the membrane are the key detail that makes this work: they allow the thin metal sheet to flex and absorb the dimensional changes caused by cooling from ambient to cargo temperature without tearing or fatiguing, in the same way that a bellows can extend and compress without stressing the material at any single point. Two dominant membrane variants exist commercially, the GTT Mark III system using a corrugated stainless steel primary barrier, and the GTT No. 96 system using Invar, each with different insulation arrangements but sharing the same fundamental philosophy of building the containment into the hull rather than as a separate structure.

Why Membrane Has Become the Dominant Newbuild Choice

The overwhelming majority of LNG carriers ordered globally over the past two decades have used membrane containment, and the reasons are largely commercial rather than purely technical. Membrane tanks make more efficient use of the hull volume because the cargo space extends closer to the ship’s actual hull lines, whereas Moss spheres, being geometrically constrained to a circular cross-section, leave unused void space between the sphere and the surrounding hull structure. For a given vessel length and beam, a membrane ship can typically carry a meaningfully larger cargo volume, directly improving the economics of each voyage.

Membrane vessels also have a lower profile above deck, since the cargo containment sits within the hull rather than protruding above it in large spheres, which improves the ship’s stability characteristics and reduces windage, a meaningful consideration for a vessel that must maintain manoeuvrability in confined port approaches and adverse weather. Shipyard construction economics have also shifted in membrane’s favour as more yards, particularly in South Korea, have built up deep expertise and supply chain relationships around GTT’s licensed membrane technology, creating a scale advantage that is difficult for the comparatively niche Moss system to match on price.

Where Moss Tanks Still Hold Genuine Advantages

Despite membrane’s newbuild dominance, Moss tanks retain real operational advantages that keep a meaningful population of these vessels in active, valued service rather than heading prematurely to the scrapyard. The self-supporting sphere design is widely regarded as inherently more resistant to sloshing loads, an important consideration for vessels that may sail with partially filled tanks, a condition that historically posed structural risk to some early membrane designs before sloshing-resistant reinforcement became standard practice. Moss tanks also offer more straightforward full-tank inspection, since the sphere’s complete outer surface is accessible without the more complex access arrangements membrane systems require to inspect insulation and membrane integrity built into the hull.

Charterers and operators with a genuine preference for Moss vessels also point to a strong long-term reliability track record; the design’s structural simplicity and inherent redundancy from tank independence have translated into a fleet history with very few containment-related structural incidents, a record that matters considerably to an industry where a single major LNG cargo containment failure would carry severe safety and commercial consequences.

Boil-Off Rates and Insulation Performance

Both containment systems have seen substantial improvements in insulation performance over recent decades, driving boil-off rates down from historical levels above 0.15 percent of cargo volume per day to modern designs achieving rates below 0.10 percent, and the best current membrane systems approaching even lower figures. This matters commercially because boil-off gas, while it can be productively used as fuel in dual-fuel propulsion systems, represents lost cargo value if generated faster than the ship’s engines can consume it, requiring reliquefaction plants or gas combustion units to manage the excess on longer voyages.

Membrane systems have generally led on boil-off improvement in recent years, partly because insulation thickness and material choice can be optimised more freely when the insulation is a bonded layer rather than needing to accommodate a spherical tank’s specific geometry, though modern Moss designs have also achieved meaningful boil-off reductions through improved insulation materials and support skirt design.

Classification, Standards, and Safety Regulation

Both containment types are governed by the International Gas Carrier Code, the IMO’s IGC Code, which sets requirements for containment system design, secondary barrier provision, and damage stability specific to gas carriers, alongside classification society rules from bodies such as DNV, Lloyd’s Register, and ABS that translate the IGC Code’s functional requirements into detailed structural and material standards. Both systems are required to incorporate a secondary barrier capable of containing cargo in the event of a primary containment failure for a defined period, though the two philosophies implement this requirement differently: membrane systems typically use a complete secondary membrane layer behind the primary one, while Moss tanks rely on a drip tray and the surrounding hull structure to manage a credible leak scenario.

The Future: Incremental Refinement Rather Than Revolution

Neither containment philosophy shows signs of disappearing, and neither is likely to see a dramatic technological leap in the near term; instead, both continue to evolve incrementally, chasing marginal boil-off improvements, lighter insulation systems, and better sloshing resistance for membrane tanks operating in partial-fill conditions increasingly common as flexible LNG trading patterns replace the fixed point-to-point contracts that dominated the industry’s earlier decades. The choice between Moss and membrane for a new vessel today comes down largely to a shipowner’s commercial priorities, cargo capacity versus operational simplicity, newbuild cost versus long-term reliability record, rather than either system representing an unambiguously superior engineering solution to the fundamental challenge of moving liquefied natural gas safely across the world’s oceans.