Offshore oil and gas production platform with bridge and jacket structureOffshore oil and gas platform banner

Key Takeaways:

  • Equinor’s Hywind Tampen — the world’s first floating offshore wind farm to power oil and gas platforms — has now generated over 18 months of operational performance data, with availability figures tracking at 94–96% and power generation closely matching design predictions in one of the most challenging metocean environments on the Norwegian Continental Shelf.
  • Hywind Tampen’s Spar-buoy floating platform technology, developed from the original Hywind Scotland demonstration project, is proving robust in 200-metre water depths and significant wave heights, validating the concept’s commercial readiness for larger-scale deployments.
  • The cost trajectory for floating offshore wind remains the sector’s central challenge: Hywind Tampen’s production cost exceeds £200/MWh, but the learning curve suggests commercial parity with fixed-bottom wind at scale could be achieved by the mid-2030s if volume grows as projected.

Hywind Tampen: The World’s First Industrial-Scale Floating Wind Farm

The first time someone proposed electrifying offshore oil and gas platforms using wind turbines floating in 200 metres of water without any fixed connection to the seabed, the idea probably raised more than a few sceptical eyebrows in engineering offices around the North Sea. Yet that is precisely what Equinor’s Hywind Tampen project has been doing since it achieved first power in November 2022 — delivering electricity to the Snorre A and B and Gullfaks A, B, and C platforms, reducing their diesel generator usage and cutting annual CO2 emissions by an estimated 200,000 tonnes per year.

The project consists of 11 Vestas V150-4.5 MW turbines mounted on Spar-buoy floating structures — a technology lineage that goes back to the original Hywind Scotland 30 MW demonstration project installed off Peterhead in 2017. The Spar-buoy concept uses a deep draught cylindrical hull, ballasted with water and a solid ballast section at its base, to achieve inherent stability through mass positioning rather than complex active control or mooring systems designed to provide restoring force. The turbine at the top of the mast — up to 100 metres above the waterline — experiences motions that are carefully designed to remain within the operational envelope of the turbine’s design specifications.

What makes Hywind Tampen commercially significant — beyond its energy delivery function — is the quality of operational data it is generating. Every hour of operation at Snorre and Gullfaks is producing validated performance data: power output versus wind speed curves, structural loads on the mooring lines, motions of the hull in the prevailing sea state, blade pitch control responses under variable loading, and O&M access frequency and cost. This data is worth more to the floating wind industry than any number of model simulations or tank tests.

Performance Data: What 18 Months of Operation Tells Us

Equinor has published periodic updates on Hywind Tampen’s performance, and the picture is broadly positive. Availability — the percentage of time the turbines are operational and available to generate power — has tracked in the 94–96% range across the fleet, which is competitive with best-in-class fixed-bottom offshore wind farms. This is a critical datapoint: early floating wind sceptics argued that the additional complexity of the floating platform, its moorings, and the dynamic cables connecting it to the grid would reduce availability compared to fixed-bottom equivalents. The Hywind Tampen data does not support that concern.

Power output against design predictions has also been broadly on track. The annual energy production from the 11 turbines — targeting approximately 88 GWh per year — has been consistent with the design basis, though the specific generation profile varies with the weather patterns of each operating year. The Norwegian Sea weather in the 2022–2024 period included some exceptionally strong wind periods, which drove higher-than-average generation in those months, and some extended calm periods where output was negligible. This variability is inherent to wind energy and is handled by the Snorre and Gullfaks platforms through a combination of wind generation and their existing gas turbine generators as backup.

Mooring system performance has been a particular focus of monitoring. The three-line catenary moorings for each Spar unit — using studlink chain and fibre rope sections in a configuration optimised for the specific water depth and metocean conditions at the Tampen area — have performed without significant incidents. Inspection by ROV has confirmed that the mooring lines and suction anchor foundations remain in good condition after multiple severe weather events, including storm conditions with significant wave heights exceeding 10 metres and wind speeds above 25 m/s.

The Spar-Buoy vs Competitors: Floating Platform Technologies Compared

Floating offshore wind is not a single technology — it is a class of technologies, each with different engineering philosophies, cost profiles, and suitability for different water depths and metocean conditions. The principal competing platform concepts are: the Spar-buoy (Hywind, used at Tampen and Scotland); the semi-submersible (used in projects including WindFloat Atlantic, by Principle Power); the barge/pontoon type (used in Chinese demonstration projects and some continental shelf applications); and the Tension Leg Platform (TLP, used in some Japanese demonstration projects).

Each concept has strengths and weaknesses. Spar-buoys are inherently stable in deep water (typically >100 metres is where they become practical) due to their low centre of gravity, but they require deep water for installation and cannot be assembled in shallow ports easily — they must be assembled in a deep harbour or alongside a quay with sufficient draft clearance. Semi-submersibles are more versatile in terms of installation — they can be assembled at standard shipyards and towed to site — but require more sophisticated motion compensation for the turbine in rough sea states.

For commercial-scale projects in the North Sea, Celtic Sea, and deep-water Atlantic margins, both Spar and semi-sub designs are credible options. The decision between them will be driven by water depth, port infrastructure availability, turbine size (larger turbines favour the stability of Spar designs), and ultimately by which technology achieves the most mature supply chain and lowest cost at scale. Hywind Tampen demonstrates Spar viability; WindFloat Atlantic (off Portugal, operated by Ocean Winds) demonstrates semi-sub viability. Neither has yet achieved commercial cost parity with fixed-bottom.

Dynamic Cables: The Often-Overlooked Critical Component

One of the least-discussed but most technically challenging aspects of floating offshore wind is the dynamic export cable — the cable that carries power from the floating turbine to a fixed connection point on the seabed or to a floating substation. Unlike static export cables buried in the seabed between fixed-bottom foundations, a dynamic cable must accommodate continuous motion of the floating platform — bending, tension variation, and potential torsion — over a 25-year design life in a corrosive marine environment.

Dynamic cable fatigue is an active research and engineering challenge. The standard marine cable designs used for fixed-bottom applications do not have sufficient fatigue life for floating applications; purpose-designed dynamic cables with improved bend stiffener systems, advanced metallic armour configurations, and carefully modelled hang-off geometry are required. Companies including Nexans, Prysmian, and JDR Cables have been developing dynamic cable products specifically for floating offshore wind, drawing on the technical expertise developed in dynamic umbilical and riser cable manufacture for the oil and gas subsea sector.

Hywind Tampen’s dynamic cables have provided the first extended real-world test of these designs at an operating scale. Equinor and Nexans — the cable supplier for Hywind Tampen — are monitoring cable performance carefully, and the data from Tampen will inform the design specifications for future commercial-scale floating projects where cable reliability over a 25-year design life is a bankability requirement.

Cost Trajectory: The Path to Commercial Viability

The fundamental commercial challenge for floating offshore wind is cost. Hywind Tampen’s levelised cost of energy (LCoE) — reflecting the full capital and operating cost of the project spread over its energy output — is estimated in the £180–£220/MWh range, depending on the cost allocation methodology used. Compare this to the Dogger Bank CfD price of £39.65/MWh (in 2012 prices, so perhaps £55–£60/MWh in nominal 2026 terms), and the scale of the cost reduction challenge for floating wind becomes stark.

Industry targets for commercial floating offshore wind — widely cited at £80–£100/MWh LCoE by the mid-to-late 2030s — require an approximately 50–60% reduction from current costs. These reductions are expected to come from: standardisation of platform designs (reducing the bespoke engineering cost currently incurred); supply chain maturation (reducing the premium currently paid for non-standard components); deployment at scale (fixed costs amortised over more units); and learning-curve improvements in installation and O&M.

The trajectory is credible but demanding. Fixed-bottom offshore wind achieved its dramatic cost reductions over a 10–15 year period with strong government support and a clearly defined technology path. Floating wind’s technology is less mature and the supply chain less developed. If the UK’s ScotWind floating wind projects — which have awarded seabed leases for floating wind development in waters too deep for fixed-bottom — reach FID in the late 2020s and begin construction in the early 2030s, they will be the commercial proving ground for whether the floating wind cost curve bends fast enough to sustain the technology’s role in the long-term energy mix.